Showing posts with label s2. Show all posts
Showing posts with label s2. Show all posts
Tuesday, March 21, 2017
Install PACMan ROM on AT T Galaxy S2 SGH i777 Jelly Bean Custom ROM
Install PACMan ROM on AT T Galaxy S2 SGH i777 Jelly Bean Custom ROM
How to Flash/Install PACMan ROM on AT&T Galaxy S2 SGH-i777 Jelly Bean Custom ROM/Firmware. PACMan ROM is a mixture of CM10.1, AOKP and Paranoid Android ROMs. All the best features of these three ROMs together in one single ROM. This Tutorial will guide you on How to Install PACMan ROM on AT&T Galaxy S2 SGH-i777 Jelly Bean Custom ROM. I have written some of the important tips below that you have to keep in mind before proceeding towards the installation.
Disclaimer: All the custom ROMs and firmwares, official software updates, tools, mods or anything mentioned in the tutorial belong to their respective owners/developers. We or the developers are not to be held responsible if you damage or brick your device. Proceed at your own risk.
Important Tips:
- Make sure your Galaxy S is rooted and have ClockworkMod Recovery installed -> How to Root and Install ClockworkMod Recovery on Galaxy S2 I9000.
- This Tutorial for flashing Tsunami X is only for Galaxy S GT-I9000, don’t try this on any other variants of Galaxy S GT-I9000.
- Charge your battery up to 70%.
- Make sure USB Debugging is enabled.
- This installation will wipe your data. Make sure to backup your phone data:
- Install Galaxy S2 SGH-i777 USB drivers -> Download USB Drivers for Galaxy S2 SGH-i777
I have written this detailed and easy to understand step-by-step instructions guide on How to Install PACMan ROM on AT&T Galaxy S2 SGH-i777 Jelly Bean 4.2.2 Custom ROM. If you are used to flashing custom roms on your device, then this should not be any different for you. However, for beginners, it is recommended that you read the whole tutorial before flashing this Custom Rom.
How to Install PACMan ROM on AT&T Galaxy S2 SGH-i777 Jelly Bean Custom ROM:
Required File(s):
- Download PACMan ROM (PAC i777 20.0.0 IconRunner.zip)
Step 1 – Download the required files mentioned above for Galaxy S to your computer.
Step 2 – Connect and mount your Galaxy S2 USB memory on your computer using the USB cable.
Step 3 – Now copy/paste the downloaded PAC i777 20.0.0 IconRunner.zip and Google Apps zip files to your SD card. Make sure the files are in the SD card root (not in any folder).
Step 4 – Then turn OFF your phone and disconnect from the USB cable.
Step 5 – Now to get in the Recovery Mode. Switch ON the phone while pressing and holding Volume Up + Home + Power buttons together.
NOTE: Screenshots of the ClockworkMod Recovery may change as new versions are released.
Step 6 – Once you are in ClockworkMod Recovery, select perform a full data wipe by selecting “wipe data/factory reset” as shown below. Use the Power button to select everything while in the Recovery Mode.
Step 7 – Then, perform a cache wipe by selecting “wipe cache partition” as you can see in the image below.
Step 8 – Now this is optional, but it is recommended to perform a wipe of your dalvik cache as well. You will not get into boot loops or any other errors. From CWM recovery, go to ‘advanced’ and then select “wipe dalvik cache”.
Step 9 – Then go back to the main recovery screen and select “install zip from SD card”.
Step 10 – Now select “choose zip from sdcard”. Using your volume keys, navigate to the PAC i777 20.0.0 IconRunner.zip file that you copied to your SD card and select it using the Power button. Confirm the installation on the next screen and the installation procedure should start now.
Google Apps: Repeat the above step for the Gapps zip file as well and install it on your phone.
Step 11 – After the installation completes, go to “+++++Go Back+++++” and reboot the phone by selecting “reboot system now” from the recovery menu as show below.
Your AT&T Galaxy S2 SGH-i777 will boot now and it might take about 5 minutes to boot on your first time. So, please wait.
Available link for download
Saturday, February 4, 2017
How To Take Screen Shot in Galaxy S2 4 0 4 Stock ROM
How To Take Screen Shot in Galaxy S2 4 0 4 Stock ROM
Follow the simple steps to take screen shot in Galaxy S2 Stock 4.0.4 ROM.
Steps
1. Go to the screen you want to capture.
2. Simultaneously press and hold the Home Button + Power Button for 2 seconds.
Thats it. You will hear a capture sound and a Toast message. To get the captured image go to /sdcard/Pictures/Screenshots.
.
Available link for download
Tuesday, December 6, 2016
How To Take A Screenshot in Samsung Galaxy S2 I9100
How To Take A Screenshot in Samsung Galaxy S2 I9100
Taking screen shot in Samsung Galaxy S2 is very easy. No application needed to capture the screen.
How To:
1. Press and Hold down the HOME button and then press the POWER button immediately before launching the recent apps window.
- You should hear a sound of a screenshot being taken and you should see a text that shows it has been captured and saved.
Done !! Now navigate to /sdcard/ScreenCapture or open galary to get the captured screen.
Tested This method, Works great with ofiicial Rom ( Android 2.3+ ) and not works with Resurrection Remix ics v1.3 Rom.
Available link for download
Friday, November 18, 2016
How to Set Password on Samsung Galaxy S2 I9100
How to Set Password on Samsung Galaxy S2 I9100
One of the common and effective methods to protect the Samsung Galaxy S2 I9100 phone is to set a password to lock its screen, which can be realized by the detailed steps illustrated in this article.
Steps to set password on Samsung Galaxy S2 I9100are as follows:
Step 1: Press the bottom-left Menu Key and select Settings to access it.
Step 2: Choose Security to move on.
Step 3: Click Set screen lock.
Step 4: Select Password.
Step 5: Enter a password with at least 4 characters (including at least 1 letter) and tap Continue when finished.
Related Articles:
How to Set Password on Samsung Galaxy S3 I9300/I9308
How to Set Password on Galaxy S4 GT-I9500/GT-I9508
How to Set Password on Samsung GT-I8190N
How to Set Password on Samsung GT-I8268
How to Open USB Debugging in Samsung Galaxy S5
Available link for download
Subscribe to:
Posts (Atom)