Download HTC One X Android Jelly Bean Firmware (Asia/Europe)
Asia : DownloadEurope : Download
Showing posts with label bean. Show all posts
Showing posts with label bean. Show all posts
Tuesday, March 21, 2017
Install PACMan ROM on AT T Galaxy S2 SGH i777 Jelly Bean Custom ROM
Install PACMan ROM on AT T Galaxy S2 SGH i777 Jelly Bean Custom ROM
How to Flash/Install PACMan ROM on AT&T Galaxy S2 SGH-i777 Jelly Bean Custom ROM/Firmware. PACMan ROM is a mixture of CM10.1, AOKP and Paranoid Android ROMs. All the best features of these three ROMs together in one single ROM. This Tutorial will guide you on How to Install PACMan ROM on AT&T Galaxy S2 SGH-i777 Jelly Bean Custom ROM. I have written some of the important tips below that you have to keep in mind before proceeding towards the installation.
Disclaimer: All the custom ROMs and firmwares, official software updates, tools, mods or anything mentioned in the tutorial belong to their respective owners/developers. We or the developers are not to be held responsible if you damage or brick your device. Proceed at your own risk.
Important Tips:
- Make sure your Galaxy S is rooted and have ClockworkMod Recovery installed -> How to Root and Install ClockworkMod Recovery on Galaxy S2 I9000.
- This Tutorial for flashing Tsunami X is only for Galaxy S GT-I9000, don’t try this on any other variants of Galaxy S GT-I9000.
- Charge your battery up to 70%.
- Make sure USB Debugging is enabled.
- This installation will wipe your data. Make sure to backup your phone data:
- Install Galaxy S2 SGH-i777 USB drivers -> Download USB Drivers for Galaxy S2 SGH-i777
I have written this detailed and easy to understand step-by-step instructions guide on How to Install PACMan ROM on AT&T Galaxy S2 SGH-i777 Jelly Bean 4.2.2 Custom ROM. If you are used to flashing custom roms on your device, then this should not be any different for you. However, for beginners, it is recommended that you read the whole tutorial before flashing this Custom Rom.
How to Install PACMan ROM on AT&T Galaxy S2 SGH-i777 Jelly Bean Custom ROM:
Required File(s):
- Download PACMan ROM (PAC i777 20.0.0 IconRunner.zip)
Step 1 – Download the required files mentioned above for Galaxy S to your computer.
Step 2 – Connect and mount your Galaxy S2 USB memory on your computer using the USB cable.
Step 3 – Now copy/paste the downloaded PAC i777 20.0.0 IconRunner.zip and Google Apps zip files to your SD card. Make sure the files are in the SD card root (not in any folder).
Step 4 – Then turn OFF your phone and disconnect from the USB cable.
Step 5 – Now to get in the Recovery Mode. Switch ON the phone while pressing and holding Volume Up + Home + Power buttons together.
NOTE: Screenshots of the ClockworkMod Recovery may change as new versions are released.
Step 6 – Once you are in ClockworkMod Recovery, select perform a full data wipe by selecting “wipe data/factory reset” as shown below. Use the Power button to select everything while in the Recovery Mode.
Step 7 – Then, perform a cache wipe by selecting “wipe cache partition” as you can see in the image below.
Step 8 – Now this is optional, but it is recommended to perform a wipe of your dalvik cache as well. You will not get into boot loops or any other errors. From CWM recovery, go to ‘advanced’ and then select “wipe dalvik cache”.
Step 9 – Then go back to the main recovery screen and select “install zip from SD card”.
Step 10 – Now select “choose zip from sdcard”. Using your volume keys, navigate to the PAC i777 20.0.0 IconRunner.zip file that you copied to your SD card and select it using the Power button. Confirm the installation on the next screen and the installation procedure should start now.
Google Apps: Repeat the above step for the Gapps zip file as well and install it on your phone.
Step 11 – After the installation completes, go to “+++++Go Back+++++” and reboot the phone by selecting “reboot system now” from the recovery menu as show below.
Your AT&T Galaxy S2 SGH-i777 will boot now and it might take about 5 minutes to boot on your first time. So, please wait.
Available link for download
Sunday, March 19, 2017
How To Update Galaxy S Advance I9070 to Official Stock Android Jelly Bean 4 1 2 Using Odin
How To Update Galaxy S Advance I9070 to Official Stock Android Jelly Bean 4 1 2 Using Odin
You can update your Galaxy S Advance to Official Android 4.1.2 via OTA or using Kies. If both of the methods not working to you follow this post to manually update Galaxy S Advance GT-I9070 to Official stock Android Jelly Bean 4.1.2 using Odin v1.85.
Note:
1. Backup your important data.
2. Enable USB debugging in your phone.
3. Battery must have 60% or more charge.
4. Disable or Exit Antivirus and Kies if you are installed.
5. Your PC must install Kies or Galaxy S Advance driver.
6. This method is only tested with Galaxy S Advance I9070 International version.
How To Update Galaxy S Advance to Official Stock Android Jelly Bean 4.1.2 Using Odin?
1. Download latest Galaxy S Advance Android Jelly Bean 4.1.2 for your country here.* If you have any trouble finding firmware from the link, just comment below with your country, then i will post the firmware link.
2. Extract the downloaded firmware zip.
3. Download Odin v1.85 - Download
4. Now, Extract and Open odin3 v1.85.exe.
5. Power off Galaxy your phone.
6. Now boot into download mode. ( Volume down + Home + Power )
7. In download mode connect your phone to PC.
8. Now look in to Odin... ID:COM box, it will be yellow with a port name and Added! message will be displayed.
( If not it will the problem of driver or USB ... check both )
9. In Odin..Click PDA button and browse to the extracted firmware folder and select the tar.md5 file eg. I9070XXXXXX_I9070XXXXXXX_HOME.tar.md5 finally Click Start button.
10. After complete update Odin will show PASS on top left and phone will reboot. now unplug phone from USB.
Thats it .... Done .
If you want to root the S Advance i9070 Android 4.1.2, follow the below post.
Galaxy S Advance i9070 Android 4.1.2, Root And Delete Unwanted System Apps To Speed Up The Device.
Available link for download
Thursday, December 1, 2016
Saturday, November 12, 2016
Install CM10 2 Nightly on Galaxy Note 2 Jelly Bean Custom ROM
Install CM10 2 Nightly on Galaxy Note 2 Jelly Bean Custom ROM
How to Install CyanogenMod CM10.2 Nightly on Samsung Galaxy Note 2 N7100 Jelly Bean Custom ROM. A new nighlty build has been released by CyanogenMod team which comes with several bug fixes and other improvements. This post will guide you on How to Install CM10.2 Nightly on Galaxy Note 2 N7100 Jelly Bean Custom ROM. Make sure to check out the following key points and keep them in mind before proceeding towards installation.
Disclaimer: All the custom ROMs and firmwares, official software updates, tools, mods or anything mentioned in the tutorial belong to their respective owners/developers. We or the developers are not to be held responsible if you damage or brick your device. Proceed at your own risk.
Important Tips:
- This tutorial is only for installing CM10.2 Nightly on Samsung Galaxy Note 2 N7100. Please do not try on any other Galaxy Note 2 variants.
- Your phone should be rooted and have ClockworkMod recovery installed from before > How to Root Samsung Galaxy Note 2 N7100
- This tutorial will wipe out all your data. Proceed at your own risk.
- Perform a Dalvik Cache wipe before proceeding from the recovery mode.
- Samsung KIES will NOT detect your phone after installing this ROM because it is a custom firmware.
- This installation will wipe your data. Make sure to backup your phone data:
- Install Galaxy Note 2 USB drivers -> Download USB Drivers for Galaxy Note 2 N7100.
I have written this detailed and easy to understand step-by-step instructions guide on How to Install CM10.2 Nightly on Galaxy Note 2 N7100 Jelly Bean Custom ROM. If you are used to installing custom roms on your Galaxy Note 2, then this should not be any different for you. However, for beginners, it is recommended that you read the whole tutorial before installing this ROM on your device.
How to Install CM10.2 Nightly on Galaxy Note 2 N7100 Jelly Bean Custom ROM:
Required File(s):
- Download CyanogenMod 10.2 Nightly (cm-10.2-20131120-NIGHTLY-n7100.zip)
- Download Google Apps
Step 1 – Download the above mentioned files for Galaxy Note 2 to your computer or download them directly to your phone.
Step 2 – Connect and mount your Galaxy Note 2 USB memory on your computer using the USB cable.
Step 3 – Now copy/paste the downloaded cm-10.2-20131120-NIGHTLY-n7100.zip and Google Apps Zip file to your SD card. Make sure the file is in the SD card root (not in any folder).
Step 4 – Then turn OFF your phone and disconnect from the USB cable.
Step 5 – Now to get in the Recovery Mode. Switch ON the phone while pressing and holding Volume Up + Home + Power buttons together.
NOTE: Screenshots of the ClockworkMod Recovery may change as new versions are released.
Step 6 – Once you are in ClockworkMod Recovery, select perform a full data wipe by selecting “wipe data/factory reset” as shown below. Use the Power button to select everything while in the Recovery Mode.
Step 7 – Then, perform a cache wipe by selecting “wipe cache partition” as you can see in the image below.
Step 8 – Now this is optional, but it is recommended to perform a wipe of your dalvik cache as well. You will not get into boot loops or any other errors. From CWM recovery, go to ‘advanced’ and then select “wipe dalvik cache”.
Step 9 – Then go back to the main recovery screen and select “install zip from SD card”.
Step 10 – Now select “choose zip from sdcard” as shown below. Using your volume keys, navigate to the cm-10.2-20131120-NIGHTLY-n7100.zip file that you copied to your SD card and select it using the Power button. Setup will start now.
Google Apps: Repeat the above step for the Gapps zip file as well and install it on your phone.
Step 11 – After the installation completes, Reboot your phone by selecting “Reboot system now” from ClockworkMod Recovery menu as shown in the picture below. It might take a couple of minutes on first boot. So, be patient.
That’s it! Your Galaxy Note 2 N7100 should now be running Android 4.3 based CyanogenMod 10.2! Go to Settings > More > About Device to verify. Let me know if you had any problem during the installation process.
Available link for download
Wednesday, November 2, 2016
HTC Butterfly Android Jelly Bean Firmware Asia
HTC Butterfly Android Jelly Bean Firmware Asia
Download HTC Butterfly Android Jelly Bean Firmware (Asia)
Firmware : DownloadRoot HTC Butterfly
Please download this two file.
Recovery
Su zip
if you downloaded both files,so now you are ready for root your htc butterfly.
1) Goto Welcome to HTCdev and unlock your bootloader.
please follow instruction at site..
2) Power on phone in fastboot,press and hold vol down + power,as phone goes in hboot,press power for 1 time,now you are in fastboot,connect phone to pc.
3) Now extract recovery zip and run start here.bat(run as admin).
4) Copy su.zip in microsd card,and install it vie recovery.
to get recovery,press and hold vol down + power,and select recovery from hboot menu.
5) Select install zip for sd in recovery and select su.zip.
Your phone is now rooted.
Available link for download
Subscribe to:
Posts (Atom)